Civil Engineering facts Civil Engineering facts: shuttering

Showing posts with label shuttering. Show all posts

Showing posts with label shuttering. Show all posts

Friday, September 14, 2018

shuttering September 14, 2018

Formwork (Shuttering) Check List at site

Check List For Formwork (Shuttering)

-------------------------------------------------------------------

Hi guys today i am going to explain you "Check List For Shuttering" so guys its very important topic for you if you are a civil engineer and supervisor so read out fully and follow us to get latest information about our topics and subscribe us on YouTube for better understand of the topics and i will provide you link of this article in the last of the topic so lets start-

1.TYPES OF SHUTTERING

a.Shuttering for column = Used in column

b.Shuttering for beam =Used in beam

c.Shuttering for slab = Used in slab

2.CHECKLIST BEFORE FIXING OF SHUTTERING

a.Check the material of shuttering is new or old.

b. Check the shuttering repair is ok or not.

c.Check the cleanness of shuttering properly.

3.CHECKLIST DURING FIXING OF SHUTTERING

a.Check the design of shuttering properly.

b.Check the rigidity,Leveling,Alignment.

c.Check the props properly

d.Check the acrow span OK?

e.Check the Braces.

f.Check the Holes. Sealing joints.

4.CHECKLIST AFTER REMOVAL OF SHUTTERING

a.Check the concrete surface-GOOD / MODERATE/LEVEL/LINE?

b.Check for any repair of surface is require ?\

c.If required then it should be done and properly investigated by a quality engineer.

SHARE IT GUYS TO YOUR FRIENDS AND MAKE PEOPLE AWARE

YouTube-

civil engineering jobs

Thursday, September 13, 2018

shuttering September 13, 2018

How To Calculate Quantity Shuttering ,Plywood,.Nails ,oil, Bellies

How To Calculate Shuttering Quantity

===========================================================

Hi guys today i am going to explain you "HOW TO BECOME CIVIL ENGINEER" so guys its very important topic for you if you are a civil engineer and supervisor so read out fully and follow us to get latest information about our topics and subscribe us on YouTube for better understand of the topics and i will provide you video link of this article in the last of the topic so lets start-

STEP 1- FIND OUT AREA OF SHUTTERING

we are considering we are going to apply the Shuttering in slab we have length of slab 75 ft and the width is 50 ft so find out the area of slab

AREA = Length x Width

AREA = 75 x 50

AREA = 3750 ft²

This is our covered area of slab where we are going to use shuttering

STEP 2- SHUTTERING TYPES

In this i am explaining you we are using wooden shuttering.

Now Quantity of shuttering?

WE calculate shuttering in running feet

STEP 3-

1.PLYWOOD :12 mm Thick (8' x 4')

= covered area x thumb rule

= 3750 Sft x 0.02

=75 Nos

plywood will we use for this covered area.

STEP 3- BEAM BOTTOM PLATES (1.5" THICK)

= covered area x thumb rule

=3750 Sft x 0.24

= 900 Rft (running feet)

STEP 3 - WOODEN BATTENS :(3"x 3")

= covered area x thumb rule

=3750 Sft x 0.4

=1500 rft (running feet)

STEP 4 - WOODEN BELLIES :

FOR SLAB =covered area x thumb rule

FOR SLAB = 3750 Sft x 0.16

=600 no's of bellies will be use in slab

FOR BEAM = BEAM BOTTOM PLATE running feet X Thumb rule

FOR BEAM = 900 X 0.5

FOR BEAM = 450 No's bottom plates will be use

STEP 5 - MS CLAMPS :

= covered area x thumb rule

= 3750 X 0.08

= 300 No's

STEP 6 - SHUTTERING OIL FOR SHUTTERING :

= covered area x thumb rule

= 3750 X 0.006

= 22.5 LITTERS

Thumb rules

VIA thumb rule we can calculate approximately values of shuttering without doing measurement

so these values can be bit more or less

if you wanna correct calculation have to measure all things where we are using shuttering .

THANK YOU

SHARE THIS ARTICLE WE WILL BRING MORE FOR YOU FOLLOW US

YouTube : Here is video on this topic you can watch it for your better understanding on my channel and subscribe it to stay in touch with us

civil engineering jobs

Blogger Templates Designed with by Civil Engineering Facts